Showing posts with label bike review. Show all posts
Showing posts with label bike review. Show all posts

Thursday, December 16, 2010

Scratch Air Downhill Bike


Trek’s Scratch bikes have been refocused for 2011, which means their hefty coil-sprung model has given up any pretence of being a trail bike, shifting to a single ring and fixed 180mm-travel (7.1in) fork. The Air, meanwhile, is pitched as a ‘light’ freeride bike that’ll climb without much grumbling.

Ride & handling: A ‘light’ freeride bike with secret climbing powers

The Scratch Air’s regular Fox RP23 shock doesn’t have the two-stage magic of the DRCV model found on Trek’s popular Remedy but since it has 20mm (0.8in) more travel, we didn’t particularly miss the feature. Set the back end up with a decent amount of sag and the Scratch Air settles back on its haunches, ready to take on pretty much anything.

It’s poised on steep, technical stuff but light enough to be chucked around. The surprise comes when you have to pedal back up. A bike in the 13.6kg (30lb) range is never going to keep pace with a 11.6kg (26lb) trail bike, but the Scratch Air puts in a decent showing.

That’s mainly thanks to the steep seat angle – in the saddle, your weight’s pushed forward, helping to keep the front end in line, and there’s always the TALAS fork’s 120mm (4.7in) travel setting if you need it. Yes, you’re hindered by the short cockpit, but it’s not meant to be fast uphill – just to get there, which it does well.

We rode a coil-sprung Scratch back-to-back with the Air, and while the heavier, slacker bike is an excellent park weapon, the Air isn’t far off it and is considerably more versatile. For lift-free areas, the Scratch Air 9 makes a lot of sense.

Frame & equipment: Versatile chassis plus decent finishing kit

Trek use the same Alpha Red aluminium frame on the Scratch Air and burlier coil-sprung Scratch – both have 170mm (6.7in) of rear travel, but the Air ends up with slightly steeper angles thanks to its shorter fork. Trek’s adjustable Mino Link lets you alter the head angle by 0.5 degrees and the bottom bracket height by 7mm, though.

Up front, you’ll find a tapered E2 head tube and under the down tube is a polymer guard to reduce the potential for rock strike damage. Out back, you’ll find the same Active Braking Pivot rear end as Trek’s other full-suspension bikes. The Scratch takes a 142x12mm rear wheel, but you can convert it to use a 135x12 if you prefer.

With the introduction of 10-speed cassettes, 2x10 drivetrains have come into their own. Shimano XT transmission is dominant throughout here and the 11-36T cassette is teamed with a Race Face Atlas 24/36 chainset to deliver a useful range.

The wheel package consists of DT Swiss E2000 wheels shod with 2.35in Bontrager XR4 tyres. Finishing kit is mostly Bontrager too, with an adjustable CrankBrothers Joplin seatpost adding to the bike’s ready-for-anything feel.


(BR)

Thursday, December 9, 2010

Cannondale SuperX SRAM Rival

While many cyclo-cross bikes are pure performance machines meant for an hour-long lung-searing event, Cannondale's SuperX is a proven winner that also offers a surprisingly smooth and comfortable ride. It's just a shame the price is so high.

Thursday, July 22, 2010

Merida Ninety-Six Carbon Team-D

Merida’s Ninety-Six project was designed to put both their World Cup cross-country race team and their bike design skills at the top of the tree. While it’s no relaxed and easy option, it’s far more fun than you’d expect from such a light, race-honed ride.

Monday, July 19, 2010

Norco Faze 2

The Faze is Norco’s singletrack hellraiser, with a sleek design and solid build. With a slightly shorter stem to encourage a more neutral riding position, it could be a trail centre killer.

Saturday, July 10, 2010

Marin San Quentin

Named after the state penitentiary in Marin County, California, the new San Quentin is helping Marin escape their cross-country image. With plenty of design input from their pro dirt jump rider Andrew Taylor, this new bike has a healthy potential to be a superb weapon in the fight for fun.

While it's aimed at jump and street riders, we wanted to see how versatile it is – sure, it may perform well at the trails, but can you pedal it there too? After all, not all of us can afford more than one bike. As it happens, the superbly well thought out geometry and cockpit layout make the San Quentin a blast for trail centre riding.

Carefully shaped seatstays take the sting out for long-ride comfort, while the well controlled short-travel fork means it can shred the downhill runs too. Dirt jumps are handled with ease, and the fairly long frame definitely suits those still learning their air art.

It's a versatile chassis that coped with every bit of terrain we could throw at it. We're not fans of the lovingly decorated chunky monkey of a saddle, but the rest of the bike gets a big thumbs-up. It achieved exactly what we set out to find – cheap thrills.

Ride & handling: Great middle ground geometry for all-round fun

With an effective top tube length of 22.5in, the San Quentin has a reasonable length cockpit for pedalling. With the saddle at full extension we found we were still about 65mm (2.5in) short of the ideal pedalling height, but it was comfy enough for a blast down the singletrack. The short stem gives an uncomfortable position when climbing out of the saddle, but that’s alleviated slightly by the wider wrist stance the bars afford.

Hacking down the hill, we instantly felt the benefit of being able to back off the spring preload and tune our damping using the Suntour Duro DJ fork's external adjusters. The front end felt composed and, despite its minimal travel, we were encouraged to push much harder than we had expected. With the wide bar-and-stem combo, steering inputs are intuitive and are met with superb feedback. The brakes lack outright power and require a fair tug in a panic braking situation.

Shifting is reliable, if a little agricultural, as can be the way with SRAM. Battering through rougher terrain, the controlled front end was bolstered by an easygoing back end. The S-bend seatstays and longer chainstays were kind to our ankles and let us play with the trail at speed, rather than getting constantly pinged off line. The only negative factor was the sofa-esque saddle. With grippy corners it constantly grabbed at shorts and had to be run slammed to the top tube to stop it from being a hindrance.

Marin san quentin: marin san quentin

Things were all good in the jump park too. The small, 15.5in frame gave us good manoeuvrability and a dirt jump bike feel. The short stem gives great control and the wide bars allow you to change direction and tweak the bike at will. The relatively long and soft back end meant it wasn’t snappily fast through the dirt jumps and round the pump track, but it was certainly way more than competent.

The fork advantage was evident again here – we were able to wind on full preload to give a stiff fork to power round the pump track and tune the damping to boost off any jump. This really is a good all-round ripper. Fit a quick-release seat clamp, a longer seatpost and a more slender saddle and you’ll have a bike that’ll happily tear it up round the trail centre as well as bust moves at the local jumps.

Frame & equipment: Light chassis with forgiving rear end, plus good fork

At the heart of the San Quentin is a 6061 aluminium frame with double-butted top and down tubes. Marin have shied away from going hydroforming crazy and specced standard round tubes throughout. A strengthening gusset is welded externally to the underside of the down tube/head tube juncture and stiffening webs span between the seat tube and seatstays.

Using a lightweight tubeset that isn’t carrying the excess baggage of cosmetic hydroforming has resulted in a simple, light (for a playbike – 14.86kg/32.8lb) and purposeful frame. The angles and lengths put it slapbang in the middle between trail bike and dirt jumper – its 16.7in chainstays, 70-degree head angle and 22.5in top tube length are all equidistant from the ideal setup for each discipline.

Just 80mm (3.1in) of suspension travel is on tap from the Suntour fork, but it’s adjustable and oil damped, proving that quality of travel is far more important than quantity. Preload can be wound on and the fork can be tuned to remain composed, not become a hyperactive pogo stick. The bike doesn’t come with a seatpost quick-release, which is a definite oversight, and its short-ish seatpost means that saddle height adjustment is limited to 140mm.

Marin obviously know how to give a bike an instant feel-good factor. Full 710mm width bars with a superb shape are clamped into a diminutive 45mm stem. Lock-on grips as standard are a quality touch and show Marin really do listen to riders about spec. Tektro’s Novela cable-actuated disc brakes are reasonably easy to set up, and give good feel, despite the obviously budget brake levers. SRAM’s X4 shifters and X5 rear mech are typically clunky, but always reliable, and the un-named chainguide is easy to set up for quiet and efficient running.

Wide bars, short stem and lock-on grips. marin must have read our minds: wide bars, short stem and lock-on grips. marin must have read our minds

About BikeRadar reviews: Our review scoring system has changed in 2010. Therefore recent reviews may have comparatively lower scores than past reviews.
bikeradar.com

Wednesday, July 7, 2010

Lapierre 2011: New downhill and dirt jump bikes

Amid the bountiful downhill trails of Chatel in the French Alps, Lapierre have revealed a new range of tweaked and revised mountain bikes for 2011, with the emphasis firmly on gravity riding.


New downhill platform

Saturday, July 3, 2010

Cannondale Rush HI-MOD 2

Cannondale’s suspension designs may have moved on to linkage-activated shocks and even electronic damping, but a dose of tried-and-tested simplicity lives on in the form of the Rush twins – single-pivot swingarm bikes sharing a carbon mainframe and 110mm of rear travel.

Monday, June 22, 2009

Cannondale Scalpel 5 (09)

"Reasonably light, proven race-winner that's fast in the right hands"
By Seb Rogers
While range-topping Scalpels get the full carbon treatment and feature Cannondale’s proprietary single-sided Lefty fork, the £2,099 Scalpel 5’s more familiar looks are courtesy of an alu main frame and conventional fork, but most of the other quirky design features remain.

Ride & handling: Fast but bouncy out back
Any doubts about the Scalpel 5’s intended use are quickly dispelled by its arse-up, head-down ride position and firm-feeling rear end. A long cockpit combined with steepish seat angle and surprisingly slack head angle make for a bike that’s more straight-line dragster than nimble trail tamer. All that weight over the front wheel translates into excellent high speed stability, at the expense of a less nimble feel when carving through singletrack.
What about those clever pivotless stays? On the one hand, they allow the rear wheel to track over obstacles that would have a hardtail skittering around and losing traction. In terms of keeping the power down and speed up, that’s definitely a good thing. Big gear mashers may notice some pedal-induced bob, but it is mostly kept under control by the Fox shock’s aggressive compression damping tune – although this does tend to restrict the rear end’s ability to absorb smaller bumps.


On the other hand, the lack of pivots means that the chainstays don’t just act as part of the suspension linkage, but as springs in their own right – springs with a very steeply rising rate, for that matter. In practice, the full 100mm (4in) of rear wheel travel is only really achievable with minimal air in the shock and thoroughly abusive riding – in normal use, you can expect to achieve perhaps two thirds of the available travel.
Whether or not this matters to you depends on how you ride. For committed cross-country racers looking for a minor traction and comfort advantage, the fact the Scalpel 5 doesn’t deliver on its promises of ‘buttery smooth travel’ may be outweighed by its race-winning credentials. For the rest of us though, it looks rather more like an over-ambitious attempt to turn a limited-use softtail into a more versatile full susser, an attempt which, unfortunately for Cannondale, hasn’t quite worked.
Frame: Oversized tubes and a unique rear end
The massively oversized head tube will accept a Lefty upgrade, while the BB30-compatible bottom bracket shell (which houses a standard Shimano SLX unit on the Scalpel 5) is supported by a down tube that – contrary to the norm – swells from a thinner front end to a fatter rear. The whole lot is put together with Cannondale’s distinctive fat welds.
It’s the rear end that makes the Scalpel unique. The bonded carbon chainstays and seatstays are flattened around the mid points to allow some flex without the need for pivots. So far, so softtail. What makes the Scalpel different from its hardtail-with-a-shock competitors is its claimed 100mm of rear wheel travel from the linkage-driven Fox Float RP2 shock.
A relatively high level of compression damping tune is designed to prevent excessive pedal-induced bobbing, while a rearward-shifted chainstay flex point helps reduce the impact of brake-induced forces on the rear axle’s movement. Worried about carbon flexing? Well, the Scalpel’s been around for nearly a decade…
Equipment: Wot no Lefty?
Riders with exhibitionist tendencies may bemoan the lack of a Lefty up front, but Fox’s evergreen 32 Float RL serves up 100mm of well-controlled and utterly predictable travel. That’s more front-end bounce than many XC racers will be comfortable with, but the compression lockout makes for a bob-free experience on climbs and sprints.
The Scalpel’s rear end isn’t cheap to make – a fact that’s obvious from the mid-range kit that adorns this version. But heavy hubs aside, there’s little to grumble about with Shimano’s SLX transmission, while the Avid Juicy Five brakes are powerful and reliable after a short bedding-in period. The flat bars are a stark reminder of this bike’s purpose in life, although the Fizik saddle’s long rails and slender Cannondale seatpost add a small degree of bump-absorbing flex.

Manufacturers description

The process is simple: 1.) Get on the Scalpel; 2.) Race fast; 3.) Get off the Scalpel; 4.) Get on podium and accept medal.
Cannondale's cutting edge technology just received another redesign to keep the winningest frame at the front of the World Cup racing scene. The Zero-Pivot chainstays and monocoque front triangle deliver the premium ride characteristics the Scalpel is known for.
(br)

Tuesday, May 26, 2009

Diamonback Bikes XTS Moto (09)

"Out-of-the-box race machine with some great parts that could easily last a season. Not the most versatile of bikes but it’s simple and effective. A shame it only comes in one size though"
The XTS Moto is Diamondback’s latest entry-level big-hit bike. Team Ashton Diamondback, headed by UK trials star Martyn Ashton, now includes a pair of rather rapid downhill racers who will be relying on the XTS Moto along with the Diamondback Sabbath to cope with the toughest race tracks around the world.

Ride & handling: Ready to race out-of-the-box. Stable at speed, pedals well and easy to throw around

Sunday, May 24, 2009

Giant Glory 1

"Downhill-only on this beast. Great frame and shock but some of the components seem to let this down. Excess weight could easily be shaved to make it a more enjoyable ride"

The Giant Glory DH may well be the choice of many a privateer downhill racer, but here we have the Glory 1, which is a couple of steps down from its relative. Giant’s entry-level big-hitter uses the same frame as the DH, along with all the knowledge this company has acquired over the years. Crammed with good products, it’s the weight that seems to be the principal tipping point for this latest offering.

Tuesday, May 19, 2009

Specialized Bicycles Big Hit 3 (09) | £1761.69

"Race-ready bike that not only offers great kit, but also an amazing amount of versatility for such a big hitter, and all at a great price"


Specialized certainly push the boat out when it comes to value for money, and the Big Hit III – the top model in this three-bike range – will help put than back on the more gravity orientated map.

Ride & handling: Superb handling and agility, but not the most efficient pedaller

Thursday, May 7, 2009

Tech: Santa Cruz Blur XC under 19 pounds!

Speedgoat Bicycles has built a sub 19-pound Santa Cruz Blur XC carbon full-suspension bike, and if you have US$11,000 to spend, they can do the same for you.
Pennsylvania-based Speedgoat is known for working closely with each customer to build a bike around his or her specific needs -- a little more durable here, a little lighter there -- so the shop rarely concentrates all efforts into a single goal.
"But this was our version of a "concept" bike, something designed to push the possibilities envelope,"

Wednesday, May 6, 2009

Lively, quick and light for how it's specced


By Gary Boulanger, US editor
The carbon Look 566 Origin is the French company's first foray into Asian-made complete bikes, and the shorter top tube and slightly longer headtube on this sportive ride make for an interesting – and affordable – alternative to the racerboy offerings out there.
It's lively, quick and light for how it's specced. The handling is amiable, with enough stiffness to trust it in the curves and on descents. With a few improvements, it could be a world beater.